Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 20, No. 2 (1996)

John M. Kiminski

Individual tip 3 of 4 from this reader’s published contribution.
John M. Kiminski, North Brookfield, Mass.

“I made a portable gas tank out of a 1-gal. anti-freeze jug, a length of gas line hose and a metal tire valve stem. I first remove the core from the valve stem (on some stems you have to run a 3/16-in. drill through the stem to make it big enough for gas flow). Then I install the stem in a hole at the bottom of the plastic jug using rubber washers. I run a gas line hose from the valve stem to the vehicle’s fuel pump or just let gas gravity-feed into the carburetor directly. You have to remember to leave the cap loose on the jug so gas will flow.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.