Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 20, No. 2 (1996)

Otto Wenz, Jr.

Otto Wenz, Jr., Tekamah, Neb.

“If you’re having trouble getting your IH 706, 806, or 1206 tractor into reverse, we can help. We’re Wenz Service Inc. (Rt. 1, Box 70A, Tekamah, Neb. 68061; ph 402 374-2202) and we’ve come up with a kit that solves the problem. We guarantee it’ll last for the life of the tractor.

“The problem with these tractors is that sooner or later bushings on the reverse toggle shaft wear down, making it difficult or impossible to get the tractors into reverse. Our kit consists primarily of a new bushing that’s over three times as long as the original 1-in. IH bushing. It installs on the re-verse toggle shaft.

“If you call us, we’ll send you one of our rebuilt top range covers, which includes the new bushing. Then you simply remove the top range cover on your tractor’s transmission and install ours. (The entire job takes about two hours). Then you send us back your old cover along with a check for the kit.

“We’ve shipped more than 150 kits in the last three years since we started selling them, and more than 99% of our customers have been thoroughly satisfied. The kit sells for $189.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.