Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 20, No. 2 (1996)

Corey Hoseth

Corey Hoseth, Mahnomen, Minn.

“A common problem on the farm or around any equipment is failure of lines, hoses, steel wiring, etc., caused by rubbing. I’ve found that wear shields made by Epha Inc. (P.O. Box 1230, 5 Campbell Drive, Hermiston, Ore. 97838 ph 800 867-2351) help solve the problem.”

The company makes two types of wear shields.

“Hose protectors” wrap around the hose or wiring and are held in place by three zip-ties placed in grooves in the protectors (you use a pair of pliers to pull the zip-ties tight). The grooves protect the zip-ties and keep the protector from slipping. A company spokesman says hose protectors are practically indestructible and are effective in temperatures ranging from 40 degrees below zero to 400 degrees above. They can be used on hydraulic hoses, wiring harness, fuel lines, radiator hoses, battery cables, brake systems, air lines, oil lines, etc. They’re formulated to resist solvents, oils, grease, gasoline, etc. Available in 4, 6, and 8-in. lengths. They sell for $2 to $4 depending on the volume ordered (cable ties included).

Hose spacers and hose looms are designed to help keep hoses organized while also preventing hose abrasion at points of contact. Available in 3/4, 1, 1 1/2, and 1 3/ 8-in. sizes, they’re also installed with cable ties.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.