“My son was putting up a 40 by 64-ft. machine shed with 14-ft. high walls and couldn’t lift the rafters into place with his tractor and loader. Fully extended, the loader on his Massey 1135 reached only 13 ft. So I got $16.35 worth of odds and ends from a salvage yard and rigged a heavy-duty ‘rafter raiser’ that fits in the middle of bucket. I used a 15-ft. length of 4-in. dia. reinforced oil field pipe.
“I made a mounting bracket out of angle and channel iron that welds to the pipe and bolts onto the bucket. The bracket holds the pipe completely rigid on the bucket. For extra strength, I used sucker rod to make a bridge on top of the pipe to reinforce it. The bridge welds to both ends of the pipe after tapering from about 1 1/2 ft. high in the center. I welded a hook onto the far end of the pipe so we could lift up rafter sections with chains. When the device is on the bucket and the bucket’s fully extended, it’ll reach 25 ft. in the air, no problem. It made life a lot easier putting up the machine shed.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.