Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 20, No. 2 (1996)

Richard Roth

Richard Roth, Scott City, Mo.

“When a bearing went out on the cylinder shaft on my combine all that was left was the inner race. The shaft was too long to use a bearing puller so I used a small air grinder equipped with a 1/32-in. cut-off wheel to cut across the race, allowing it to pop and slide right off.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.