Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 20, No. 3 (1996)

Wayne Hagen

Individual tip 2 of 2 from this reader’s published contribution.
Wayne Hagen, Lake Alma, Sask.

“The problem with most small tubing benders is that they’re hand-operated and must be upright to work and in tight spaces you can run out of room. They’re also labor intensive. My bender is built to work horizontally with an electric-driven hydraulic unit. It takes various tubing dies from 1/2 to 1 1/2-in. and I also made dies for square tubing and flat iron. It works great for bends on corral panels and other such jobs. It works best with standard wall round and square tubing up to 1 1/2-in. dia. and up to 2-in. flat iron.

“All my machines are built to work on an open center hydraulic system. They can all be connected to one central power unit. I can make detailed do-it-yourself plans available for any of them.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.