“Over time, field cultivator shanks tend to straighten out so that sweeps no longer run level. Rather than attempting the difficult task of recurving the shank, I bend the sweep. The method I use is to clamp the pointed end of the sweep in a vise. Then I slip a 3 to 4-ft. length of pipe over the shank portion of the sweep and let the pipe hang free. Using a torch, I heat the shank at the point where it meets the body of the sweep. The weight of the suspended pipe causes the sweep to slowly bend. With a little practice, sweeps can be easily and safely bent to any desired angle. I’ve used this technique on all sizes of sweeps and have never had a sweep break at the point at which it was bent.
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.