“You can make an older IH tractor steer like a brand new Cadillac with a power steering system like the one I made for my 1939 Model A. The identical design could probably be used on any Farmall A built between 1937 through the mid-1940’s since they all had the same manual steering system.
“I got a power steering control unit and hydraulic cylinder off a junked Massey combine and a power steering pump off a car. I removed the tractor’s steering shaft and attached the combine’s power steering unit to the tractor’s steering wheel. I mounted the power steering pump on the side of the engine and belt-drive it off a pulley on the generator. I mounted the ram end of the hydraulic cylinder on the front axle and the rear end on the tie rod. I plumbed the system together with 3/8-in. dia. copper tubing.
“It cost only about $50 and works like a dream.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.