Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 20, No. 5 (1996)

Al Rens

Al Rens, Hull, Iowa

Here’s a simple sure-fire way to remove square keys from drive shafts.

“You weld an 8 to 12-in. piece of flat iron to the key. Then you weld a second piece of flat iron at a right angle to the opposite end of the first piece. This provides a lip so you can simply tap the key straight out with a hammer. I’ve used this method for years and it works every time. It also works for well for pulling bearings.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.