Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 1 (1997)

Jeff Roberts

Jeff Roberts, Needville, Texas

“Not long after I bought an old Deere 60 planter with round fiberglass hoppers, I began to notice wear spots where the hoppers rubbed against toolbar brackets every time I lifted the planter. Soon the hoppers were badly cracked; one even had a large triangular hole in the bottom.

“To fix the problem, I used auto body filler, or Bondo to reseal all the worn-open cracks. To fix the large holes, I cut a piece of nylon window screen (aluminum would work too) and ‘super glued’ it into position over the hole. I applied Bondo over the hole thickly and worked it gently into the screen from both sides. The Bondo cost only about $10 and worked great. It should last longer than ordinary fiberglass repair kits and was a lot cheaper than buying new hoppers.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.