Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 1 (1997)

Dennis Kees

Dennis Kees, Harlan, Ind.

“The trouble with the 3-in. twisted spikes on our 9-shank Glencoe soil saver was that in bringing up soil and residue in hard ground they tripped a lot, eventually wearing them down at the neck and breaking them off. We solved the problem by replacing them with 10-in. sweeps and 2-in. wide, 1 1/2-in. thick straight chisel plow shanks, which simply bolt with a 3-in. bolt right through the sweep onto the shank. They work great for holding sweeps down when breaking up hard pan and they wear at least twice as long. Commercial kits are available to do much the same thing, but they’re extremely difficult to install and cost about $40 per shank. The straight spikes we used cost $13 apiece; the sweeps $10 apiece.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.