Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 22, No. 5 (1998)

John Sparrow

Individual tip 1 of 2 from this reader’s published contribution.
John Sparrow, Barrie, Ontario

John made a tool for repairing and cleaning threads on bolts in small, hard-to-get-at places such as manifolds. It consists of a 3-in. length of 1 in. dia. pipe with a 3/4-in. hex nut or shaft welded to one end and a small thread die fitted into the other. A 1/4-in. dia. set screw holds the die in place in the pipe. To use, he simply turns the die on the bolt with a socket or straight wrench. Works great on any size bolt from 3/8 up to 1/2 in., he says.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.