Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 22, No. 5 (1998)

Murray Huff

Murray Huff, Edmonton, Alberta

“You can use polyester resin-type auto body filler, such as Bondo, to fix worn shafts and pulleys to ensure a virtually permanent tight fit. It works best on low-speed applications, such as the worn reel pulley on my MacDon pickup reel, which I fixed two years ago. Once it’s applied to the shaft or pulley, you must reassemble the machine fairly quickly as the filler hardens in 5 to 10 minutes. The next time you disassemble the machine, it takes just a bit of heat with a torch to disassemble.

“One caution: auto body filler absorbs a lot of moisture, so if your equipment isn’t shedded, it could rust badly in the joint.

“You can buy a whole gallon of the stuff for between $15 and $30.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.