Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 22, No. 5 (1998)

James McGowan

James McGowan, Russell Springs, Ky.

When the radiator on his 1950’s International Cub tractor froze, James took it to a local radiator shop where he was told the only fix was a new radiator.

“But I had some extra time and couldn’t justify the expense of a new radiator,” he says.

“So I got some J.B. Weld from our local K-Mart, mixed it up, and applied it liberally to both sides of the radiator where the cores were pushed out. I let it cure and dry for about a week, then filled the bottom two cores with silicone caulk, which I also allowed to cure and dry for a week. I pressure-tested the radiator and it seemed fine. In fact, it held water and anti-freeze without leaking until I traded the tractor off a year or two later. As far as I know, it still does.

“Cost was $4 or $5 for J.B. Weld and $3 for the tube of silicone caulk.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.