Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 23, No. 1 (1999)

Nathaniel Regier

Nathaniel Regier, Newton, Kan.

“I re-worked the hood on my 1978 Ford F-350 1-ton pickup so it tilts forward for easy service. I can stand right beside the engine to work on it. I just grab hold of the original latch on front of the hood and pull it down. My technique works well on Ford F series pickups made from 1971 to 1979 but I think the idea would work well on many models. I cut the hood just in front of the windshield. A pair of chains keep the hood from flipping forward all the way over. The chains have springs on them so when the hood goes up it doesn’t stop with a ‘jar’. I made the hinge out of two rubber supports and mounted them under the grill and above the bumper. The radiator was originally bolted onto a steel housing behind the grill. I had to build a steel frame for the radiator so that it stays with the pickup frame as I raise the hood.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.