“This gauge wheel adjustment tool saves me several minutes every time I have to change the depth setting on my 15-ft. Deere 750 no-till drill, which has 24 press units on it. It can also be used on air drills with the drill-type press units.
“The tool is a 2.5-in. long forked wedge with a 9 1/2-in. handle. There’s a 5/8-in. gap between the two prongs on the U-shaped fork. It tapers from the point to 1-in. thick and fits around the adjustment pin between the head of the pin and the main frame of the press wheel unit. You just slip the wedge in and move the handle back and forth to pry the pin out more easily to adjust the wheel.
“I cast the tool by pouring molten metal into a mold. Then I turned it in a lathe and sanded it to remove the rough edges.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.