Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 23, No. 3 (1999)

Gene Trybom

Gene Trybom, Lawrence, Kan.

Gene got tired of going back to his shop to get tool after tool and still not always having every one he needed. So he mounted a big tool chest on a shop-built trailer that he pulls to the field with his 4-WD ATV.

“I bought a big Craftsman tool chest with 15 or 16 drawers. I built a 26 by 40-in. frame out of 1 1/2 by 3-in. scrap metal and mounted the tool chest on the back. I fitted the front of the trailer with a small work table I made out of 1/4-in. thick steel plate and tapped a 1/4-in. dia. hole in the left front corner of the table so I could mount my 5-in. vise on it. I made a hitch for the trailer out of 1 1/2-in. sq. tubing. It telescopes from 18 to 25 in. and folds underneath the table when not in use. The trailer rides on two 5/8-in. dia. steel shaft axles fitted with 3 by 10-in. pneumatic tires. I made my own front wheel swivel assembly so the rig trails my Honcho 4-WD ATV perfectly.

“It saves a lot of time because you’ve got all your tools with you. And it cost less than $225 to build, including $180 for the tool chest, since I used mostly scrap materials.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.