Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 23, No. 3 (1999)

Glen Teel

Glen Teel, Hays, Kan.

“When the clutch slave cylinder on my 1985 Chevy S-10 began leaking, I found out Chevrolet wanted more than $90 for a kit to repair it.

“I found a much cheaper and easier fix than Chevy’s. I removed the plunger from the cylinder and saw that the rubber seal around it was bad. So I looked in one of the O-ring kits I had around the farm, found one that fit snugly over the seal, and then simply replaced the plunger.

“I made this repair six or eight months ago and the cylinder hasn’t leaked since.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.