Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 23, No. 3 (1999)

Roller Chain Repairs Made Easy

Featured source:

Counting, splitting and handling bulk roller chain is a lot easier with the “Chain Master” from Gerry’s Welding and Fabrication, Inc., Vienna, IA. The Chain Master contains an electronic counter, holding vise, and display stand. The self-powered electronic counter counts the number of pitches of 40, 41, 50, 60 and 80 single, double, triple, and extended pitch roller chain. Making a new chain is easy. You first use the Chain Master to count the number of pitches on an old chain (or use the number from a parts book) and then reproduce what you need off a bulk roll.

“Buying bulk chain saves money and the simple double vise on this unit holds the chain in place on either side of the chain splitter at a comfortable working height,” says Cory Westhoff of Gerry’s Welding.

“It’s a great new way to display, count and break roller chain. It actually counts the pitches of chain - new or used. You can use it to count the pitches on a piece of old, stretched chain to find what size chain you actually need to replace it.” Standard chain breaking tools can be used but a new chain breaker that pushes the pin all the way through without bending side links is also available. The easy-loading bulk display stand has eight swing-out bars that hold multiple reels of roller chain. The top of the stand holds tools, bins for links, or boxes of chain. The Chain Master sells for $843.75. A table model without the display stand is also available. The Counter, vise and display stands can also be purchased separately. Contact: FARM SHOW Follow-up, Gerry’s Welding & Fabrication, Inc., P.O. Box 37, New Vienna, Iowa 52065 (ph 800 624-7554; fax 319 921-2108).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.