Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 23, No. 6 (1999)

Richard Zimmerman

Richard Zimmerman, McBride, British Columbia

“When I have to drop a transmission out of a big truck, I don’t trust transmission jacks. They don’t seem too safe. So I came up with my own method.

“I use a pipe across the top of the frame with holes drilled in line with the sides of the transmission. I run a steel cable under the transmission and up through the holes in the pipe and roll up a few feet of cable on the pipe. Then I unbolt the transmission and drop it down by unwinding the pipe with pry bars fitted into holes on the ends of the pipe. The more holes you put in the ends of the pipe, the more precisely you can pull the transmission into place.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.