To bend the straps used on the reel, Bennett used a press he built a few years ago. The press is made from 6-in. channel iron. He powers it with a 12-ton hydraulic jack, mounted on the top beam of the frame. The jack base is a 1/2-in. steel plate with a 2-in.
solid steel shaft welded on the bottom where he attaches his tools. When he releases the jack, it and the base are pulled up away from the work by cables attached to a spring he salvaged from an old Hesston hay stacker. The adjustable height work table sits on a steel rod inserted in holes punched in 1/2 in. steel flat iron he welded on the sides of the channel iron frame.
“I use it to bend flat iron, press off bearings and that type of thing,” he says. He’s building a bigger press using a truck hoist hydraulic cylinder.
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.