Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 24, No. 1 (2000)

“Wrenchmate” Adds Leverage To Open End Wrench

Featured source:

When you just can’t get enough “oomph” on an open-end wrench to loosen a stubborn nut or bolt, you might find the new “Wrenchmade” useful.

Invented and manufactured by Ed Frazzini, Corning, N.Y., it’s an extention that simply slips over the end of the wrench and will work in hard-to-reach areas. It’s got a U-shaped opening at one end and a pair of pins. One pin fits into the box end of the wrench and the other behind the shank of the wrench.

A vinyl handle makes it easy to grip. Sells for $25, including S&H.

Contact: FARM SHOW Followup, Ed Frazzini, Tool Design Innovations, 421 Watauga Ave., Corning, N.Y. 14830 (ph 607 962-0805; E-mail: [email protected]).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.