“Last spring I had a problem with my 1970 Ford 8000 tractor and found a low-cost solution. The tractor’s rear wheels have cast iron ‘pegs’ that fit into grooves, or keyways, on the axle. One of the bolts that hold the wheel to the axle came loose and the pegs broke. I turned the wheel 180 degrees on the axle to position it so the axle caps are now on top where the keyways are, instead of on the bottom. I removed the two caps and had a local machine shop cut keyways into them to match the axle grooves. Then I inserted the keys in those keyways, all the way through the cap and wheel so the bolts are tight on the axle.
“I spent less than $100. Replacing the entire wheel would’ve cost $900 to $1,000.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.