“After two years of use, I’m willing to share an unusual money-saving repair I came up with. On our farm well’s submersible pump, there is a coupler between the motor and pump. On the pump side, the coupler has a hex shaft while the shaft on the motor side has finer splines. The splines on the motor wore off so we had to get a new motor. A year later, it happened again so we decided we had to do something. I just ground the end of the motor shaft back slightly and put high grade Loctite (the green color) on the shaft and collar and tapped it back on again and reassembled the pump. After giving it plenty of time to set up, we put the pump back in use again. The repair has held up for two years. That’s twice as long as when it was new. So I would advise anyone to at least try what we did rather than buy a whole new motor.
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.