“A few years ago, FARM SHOW featured a ‘Super Drill’ which would drill large-size holes in all kinds of metal. I lost the address and would like to get more information.”
Editor’s Note: The Super Drill was invented in Australia. What makes it unique is that the one bit will cut holes from 1/2 to 3 in. dia. You simply drill a starter hole with a normal bit and then set up the Super Drill for whatever size hole you need. It’s fitted with a couple tool steel cutters that are adjusted in and out with an allen wrench. It operates at slow speed – so you can use a less powerful drill – and costs about the same as a large twist bit but will do the job of multiple bits. A 3/4 hp. drill will drill a 2-in. hole in hard steel. In many cases, the drill eliminates a trip to a machine shop. Prices range from $40 for a Super Drill with a single cutter up to $180 for a boxed set with accessories. It has been distributed in the U.S. for years by Peter Schofield, Super Drill Sales West, 2240 Meadow Creek Rd., Lincoln, Calif. 95648 (ph 916 645-3198; Web site: www.superdrill.com). In Canada, contact: Super Drill Sales, RR3, Waterford, Ontario NOE 1Y0 Canada (ph 519 426-7886).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.