Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 24, No. 4 (2000)

Cliff Brandenburger

Individual tip 2 of 3 from this reader’s published contribution.
Cliff Brandenburger, Beecher City, Ill.

Brandenburger also came up with a nifty way to store saw blades. He uses a lot of different circular saw blades and wanted a way to keep them in good order. He came up with a wall-mounted storage bracket with twenty swinging arms that each hold a blade. The arms hang freely from a long bolt that runs through a plywood brace at the center of the bracket. The blade hangs loosely on a peg at the middle of each arm. The arms extend down below the blade so you can grab it with your hand, swing it up, and pull the blade off. The entire blade holder takes up only about 2 sq. ft. of wall space.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.