Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 24, No. 4 (2000)

Jim D. Hansen

Individual tip 1 of 2 from this reader’s published contribution.
Jim D. Hansen, 11386 147 th Ave., Bloomer, Wis. 54724 (ph 715 568-1175)

“I was using a skid steer loader to haul haylage from a bag silo about 200 ft. to my stanchion barn, where I shoveled the feed into a cart and fed it to my cows. To make the job easier I mounted a 5 hp electric motor on an old 250-bu. manure spreader. I also cut a hole in the barn floor. I dump feed into the spreader at the bag silo and then pull it up into the barn and start the motor. The spreader drops the silage through the hole and directly into the feed cart. I don’t have to run my tractor back and forth to the barn all the time just to fill the feed cart.

“I’ve been using this idea for five years. It works so good that several implement dealers in my area have copied the idea. One dealer mounted an electric motor on a self-unloading feed wagon. The motor is geared down to run the spreader at 350 rpm’s instead of the standard 540 rpm’s.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.