Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 24, No. 4 (2000)

Bob Burton

Bob Burton, Love- land, Okla.

“I’ve come up with a wire tie tool that eliminates the need for any other tool when tying barbed wire to T-posts. It’s a 4 1/2-in. long, 1/ 2-in. dia. steel rod with a small hole in one end that’s used to twist the wire. The other end is narrowed up and has a notch in it. You use the notched end to bring one side of the wire clip under the barbed wire and pointing up. Then you insert the end of the clip into the hole end of the tool and twist the clip around the wire. It’s simple, but works great.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.