Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 24, No. 6 (2000)

Clair and Warren Wilson

Individual tip 1 of 2 from this reader’s published contribution.
Clair and Warren Wilson, Winchester, Ill.

“We get a lot of use out of this portable 4 by 5-ft. work table, which was simple to build. A sheet of 3/4-in. thick plate steel makes up the table top. Lengths of 4-in. sq. box steel, with small wheels at the bottom, were welded directly to the table top to make the legs. There is no additional bracing. There’s a drawer on one side of the table and brackets at both ends for holding squares, clamps, bars, etc. We do a lot of fabricating and have a series of cranes along our shop ceiling. We use the cranes to set objects on the table for repairs. We can even weld stuff that we want to repair right on top of the table. When we’re done welding we just cut the part off and grind the welding material back down to make the table smooth again. Also, we cut holes into the table for hold-down bolts.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.