Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 25, No. 3 (2001)

Bob Hudspeth

Bob Hudspeth, Era, Tex.

“I do a lot of woodwork, especially with my radial arm saw. I didn’t like having to let go of the machine or the wood I’m cutting to turn the machine on or off. I wanted hands-free operation and found a simple way to do it that also lets me turn any other power tool into a “hands free” machine without modifying it at all.

“I mounted an electrical outlet on the wall and removed the little connector tab between the terminals on one side of the plug-in assembly. This let me wire the top outlet to be ‘hot’ at all times for use as a normal plug-in. Then I wired a foot control switch to the bottom outlet so it’s ‘hot’ only when the foot control is pressed. Now, with the radial saw plugged in and its switch turned ‘on’, it will only work when I press the foot control, leaving my hands free at all times. I put a 10-ft. cord on the foot control so I can move it around and use it for any other power tool.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.