Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 25, No. 3 (2001)

John C. Morton

John C. Morton, Janesville, Wis.

“A wheel bearing on the steering axle of my combine went bad, which caused the wheel to fall off in the field and left the bare spindle suddenly buried in dirt 16 in. deep. To get it out, I dug dirt out from under the axle and slid a scissors hoist under it. I attached a hydraulic hose to the hoist and raised the combine out of the dirt. Since then I’ve also used this idea for other jobs. My total cost was about $30 for a new hydraulic hose and quick coupler. The hoist came off an old ear corn wagon.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.