Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 25, No. 3 (2001)

Kenneth L. Nielsen

Kenneth L. Nielsen, Marshall, Minn.

“The pto shaft on my big tractor-mounted V-type snowblower operated at a steep angle and broke the yokes frequently. To solve the problem, I converted it to a chain-driven system with a jackshaft.

“I built a platform on the blower out of 7-in. channel iron. I bolted two pillow block bearings and a short shaft fitted with a spocket to the platform. Then I put a sprocket on the input shaft, installed an idler sprocket for the tightener, and fitted it with a #80 roller chain.

“Now the pto shaft runs level and the snowblower pulls much easier. It seems to blow more snow with the same amount of power. I know this setup takes a lot of stress off the driveline of the tractor.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.