Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 25, No. 3 (2001)

Max R. Fitzpatrick

Individual tip 2 of 2 from this reader’s published contribution.
Max R. Fitzpatrick, Whiteland, Tenn.

“When working inside, I drive onto a rectangular frame made from two pieces of channel iron about 10 ft. long and 12 in. wide, with cross bars welded at either end. I drive onto the C-channel, then hook my engine lift onto the front and raise the vehicle enough so I can work on it. As a safety precaution I block up the front end with heavy wooden blocks.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.