Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 25, No. 4 (2001)

Pete Peters

Individual tip 1 of 2 from this reader’s published contribution.
Pete Peters, Osler, Sask.

“Here’s a vise I made for sharpening saw chains. To build it, I mounted a small vise on a stand and extended the width of the vise jaws to 10 in. by welding two pieces of flat iron, 1/2 in. thick by 1 in. wide and 10 in. long, to the existing jaws. This 10-in. wide clamp holds a large section of chain which can then be sharpened easily.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.