Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 25, No. 4 (2001)

Pete Peters

Individual tip 2 of 2 from this reader’s published contribution.
Pete Peters, Osler, Sask.

“I also made this bearing race removal tool. It consists of a 3-in. piece of 3/4-in. steel rod and an 8-in. piece of 2-in. sq. tubing. I drill a hole in the piece of tubing and stick the rod through it and weld it in place about 10 in. from the end of the rod.

“Next, I weld the tip of a steel chisel to the end of the rod, positioned at a backward angle. Now you’re ready to go.

“Slip the rod into the race and hook the chisel tip onto the inside. Then pound on the sq. tubing with a hammer to pull it out.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.