Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 25, No. 6 (2001)

Michael Vanhorn

Michael Vanhorn, Sentinel Butte, N. Dak.

“When the U-joints on our 1983 Ford F-250 4-WD pickup went out, we made a tool that lets us remove the U-joints without having to take the driveshaft out. We just slide the tool in there, take the U-joints off, and push the new ones in. The tool consists of two flat metal plates that are 2 1/2 in. wide by 5 in. long, with a nut welded into the center of it. We simply tighten up a bolt inside the nut in order to push the U-joint out. Then we turn the tool around and push the new one back in.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.