Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 25, No. 6 (2001)

Paint-On Rust “Remover”

Featured source:

There are a number of rustproofing products on the market, but the one that most do-it-yourselfers seem to be using is POR-15, a “paint-over” product that stops rust in its tracks.

When POR-15 is painted onto rusty surfaces, it chemically reacts with the rust to create a rock-hard finish that won’t crack, chip or peel. It creates a hard finish that stops further corrosion and is not affected by road salt, gas or oil.

POR-15 can be painted directly onto rusted metal and used as a primer on frames, floor boards, fenders, bumpers, inside door panels and trunk areas.

POR-15 is available in black, silver, grey, clear; or semi-gloss black. One quart of black, silvery, grey, or clear sells for $29. One quart of semi-gloss black sells for $31.

Contact: FARM SHOW Followup, Imperial Restoration, Inc., 308 Lockport St., Lemont, Ill. 60439 (ph 800 576-5822) or Resto Motive Laboratories, Inc., Box 1235, Morristown, N.J. 07962 (ph 973 887-1999; fax 973 887-8007).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.