Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 26, No. 3 (2002)

T.E. Salsman

T.E. Salsman, Richmond, Ky.

“My son-in-law operates Circle Seal & Gasket, a company that makes custom-sized O-rings for various industries. O-ring material is cut to precision length and the ends joined by a heat process. As the company has been in business for only about a year, close management of operating costs is mandatory. At first they used a hand-operated cutter to cut all raw material, but it’s a tiring, labor-intensive operation. There was nothing on the market that could do the job at a price they could justify.

“So I started developing an air-operated cutter. As it turns out, my crude prototype has been in daily use for months and has cut material for several thousand O-rings. My billed cost for parts in building it was only $55.

“The cutter operates at about 90 lbs. air pressure and drives a 1 1/2-in. air cylinder with a 2-in. stroke. The push rods are two grade 5 bolts that operate through bronze bushings (replaceable at Ace Hardware store for $1.49 each). The cutterhead, which has a 1/8-in. key fixed in place with JB Weld, drives a Stanley commercial grade box knife blade. The cutterhead is controlled by a 1-in. shaft with 1/8-in. keyways at 30, 45, and 90 degrees, to cut the material as required by the type splice for that particular O-ring. Moveable guides keep the material aligned for cutting.

“I’m now looking for a source of knives which will increase the tool’s cutting capability.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.