Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 26, No. 4 (2002)

R. Kevon Stockwell

R. Kevon Stockwell, Jeffersonville, Ohio

“We had a 1989 Deere 750 no-till drill that had a pin with double roll pins holding a pressure spring in place. We found the easiest way to remove the roll pins was to heat the shaft red hot with a torch.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.