Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 26, No. 6 (2002)

W.A. Gibbs

Individual tip 1 of 2 from this reader’s published contribution.
W.A. Gibbs, Elmwood, Tenn.

“When one of the bolts broke in on one side of the front part of the engine housing on my Deere 1530 tractor, I found that I couldn’t drill the bolt off. I tightened the other bolts, but they wouldn’t stay tight so I had a problem. The engine housing was connected to the tractor’s steering sector, so removing it would have been a lot of work. To solve the problem, I used a pair of 7-in. channel irons to hold the engine block and transmission together. One channel iron bolts to the block and the other to the transmission. The channel irons are connected by a pair of long bolts that are used to draw the engine housing and transmission tight together. It equalizes pressure on both sides of the engine and transmission, so the bolts on the channel irons have no pressure on them at all. All the pressure is on the original side-mounted bolts.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.