Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 27, No. 4 (2003)

Refueling Made Easier With Home-Built Stand

Featured source:

On a busy farm, refueling tractors and trucks is an ongoing task, but Gord Stein of Barrhead, Alberta made the job easier and safer by building a good-looking metal fuel tank stand.

The unit holds three 300-gal. tanks 9 ft. off the ground. Stein hooked two of the tanks together for a 600-gal. diesel capacity, and he uses the third tank for gas.

He included a 2-ft. wide walkway (3 ft. off the ground), complete with a two-step ladder and handrail, for reaching tractor fuel caps. Just beneath the walkway, Stein installed two metal storage compartments for keeping jugs and miscellaneous items.

Another ladder leads up to a tank-level platform. A guard rail makes the lofty perch a safer place to be.

Stein used 2 7/8-in. oilfield pipe for the frame of the stand and metal strap iron for side braces and tank cradles. The ladders and guard rail are made of 3/4-in. sucker rod.

He says materials cost him under $300 (Canada), and it took him about a week to built the unit.

Contact: FARM SHOW Followup, Gord Stein, R.R.#3, Site 2, Box 9, Barrhead, Alberta, Canada T7N 1N4 (ph 780 674-4706).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.