“I built an inexpensive wood stove out of an old fuel barrel. I mounted the barrel on four metal legs, then cut a door into one end of the barrel and installed a baffle inside. A stovepipe chimney extends up to the building’s roof. I use my forklift to haul the stove outside the shop where I clean out the ashes. A fan blows down toward the stove to help spread the heat around. A furnace filter mounts on the back side of the fan and filters the air before it goes through the fan motor. I lined both sides of the stove with fire brick and also welded a couple of angle iron stiffeners lengthwise to both sides of the stove to keep the sides of the barrel from buckling. The stiffeners are spaced 6 in. apart and located just above the fire brick.
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.