Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 27, No. 5 (2003)

Steve Spiering

Individual tip 2 of 2 from this reader’s published contribution.
Steve Spiering, 48594 Hwy. 158, Milbank, S. Dak. 57252 (ph 320 568-2246)

“Our 7-in. dia., 55-ft. long, pto-driven grain auger wasn’t big enough to meet our needs any more, so I converted it to an electric-op-erated model to boost capacity. A 5 hp electric motor mounts on two lengths of 1 1/4-in. dia. steel tubing that attaches to the auger’s A-frame with four muffler clamps. The motor belt-drives the auger gearbox. If I want, I can use my tractor to pto-drive the auger again by loosening eight bolts on the clamps. The clamps can be slid up or down the frame in order to tighten or loosen the belts. The auger has a capacity of about 400 bu. per hour.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.