Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 27, No. 6 (2003)

Bob Moty

Individual tip 1 of 2 from this reader’s published contribution.
Bob Moty, Crystal Lake, Ill.

“I made a couple modifications to make my auto ramps more useful. The first was reinforcing them on the sides with some scrap steel. Next, I bolted 8 by 12-in. pieces of belting onto the lower ends of each ramp. This way when the tire rolls up onto the belting, the ramp is held in place as the car rolls up onto it, rather than scooting away.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.