Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 27, No. 6 (2003)

Steve Spiering

Individual tip 1 of 3 from this reader’s published contribution.
Steve Spiering, Milbank, S. Dak.

“Here’s an easy way to put threads all the way through lengths of pipe or square tubing. Use a woodworker’s dowling jig to make a centered, true pilot hole. Drill a hole and insert a nut. Weld around the perimeter of the nut (a wire welder works best) and grind flush. It’s important to clean the threads with a tap before using. If you do a careful job you can make it look like threads cut into solid stock. I used this technique to put caster wheels on an object where there was no room for a nut on the other side.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.