Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 28, No. 2 (2004)

Floyd VerPloeg

Floyd VerPloeg, Lovilia, Iowa

“In your last issue, a reader talked about greasing U-joints and tie rods until the grease comes out the seals. This is wrong on two counts. Number 1, grease does not wear out. Number 2, if you break the seals by forcing grease out through them you open up a way for dirt to get in, and too much grease can lock up the bearings inside so they will not roll, wearing them out faster. I spent 30 years as a machine repairman at Maytag Co.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.