Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 28, No. 4 (2004)

Dan Jacobson

Individual tip 3 of 3 from this reader’s published contribution.
Dan Jacobson, 8913 Weaver Lake Dr., Pequot Lakes, Minn. 56472

“This hydraulic welding table raises from 35 in. to 7 1/2 ft. high and will lift up to 1,100 lbs. To raise the table all I do is pump a foot pedal. To lower the table, I depress a smaller pedal and the table comes down. The table measures 21 by 36 in. and has a 1/2-in. thick working surface. If ever there was a backsaver, this is it - I’d never part with it.

To build a hydraulic welding table like this from scratch I’d charge about $1,200.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.