Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 29, No. 3 (2005)

David Kent

Individual tip 2 of 2 from this reader’s published contribution.
David Kent, Bedford, Iowa

“On a New Holland TR 85 combine, the way the cylinder bars are attached to the rotors creates a slap (backward and forward) in the rotors whenever they’re under load. This wears out the connecting drive sprockets and the double chain that’s used to connect the rotors to the gearboxes. It’s actually a rather crude system. St. John’s Welding in Kansas suggested the first bar be set at at 90 degrees and the second bar split the distance between the first bars. But the factory rock trap doesn’t always work so you can have trouble with those settings. Instead, I positioned both bars at 90 degrees to the rotor. It seems to even out the load and allows rocks to flow through. I used the mounting bar brackets off a junked New Holland TR 70. I use the cheaper second bar only. Now it seems to have more capacity.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.