Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 29, No. 3 (2005)

Martin J. Engelbrecht

Individual tip 2 of 2 from this reader’s published contribution.
Martin J. Engelbrecht, Jefferson City, Mo.

“The 3-pt. hydraulics on our small Massey Ferguson loader tractor tend to ‘bleed off’which causes the lower lift arms to drop down. Sometimes we use the tractor to feed hay to our cattle, and if there’s a plow on back we don’t want it accidentally falling onto the ground.

“So we ran chains from two clevises mounted on the tractor’s differential to two more clevises on the lower lift arms. Each lower clevis uses a pin that goes through a hole already in the lift arm. To remove the chains we just remove a pin from the clevis on each lift arm. It saves a lot of aggravation. It’s important to use chains that are strong enough to override the valve on hydraulics in case someone accidentally engages the hydraulics.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.