Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 29, No. 3 (2005)

Clyde Barnhart

Clyde Barnhart, Athens, Ohio

“At 88 years young, I can no longer reconnect the driveshaft on my mower to the pto on my Gravely tractor. You have to lie down, reach under, and push and pull at the same time. Being reluctant to lose my independence, I made a simple sheet metal clip which holds the springs compressed behind the ring on the driveshaft.

“I clamp a vice grips onto the pto, steer the ‘clipped’ driveshaft onto the end of the pto, and wiggle the wrench while pushing in only one direction and the thing slides into place. After pulling out the clip and removing the wrench, I’m ready to mow.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.